Title

A CFD based empirical model for assessing gas holdup in bubble columns

Document Type

Article

Publication Date

5-1-2019

Publication Title

Canadian Journal of Chemical Engineering

Volume

97

Issue

S1

First Page

1643

Keywords

bubble column, CFD, empirical model, gas holdup

Last Page

1654

Abstract

Bubble columns are widely used in many industrial applications. Gas holdup knowledge is an essential element in bubble column design and process optimization. Despite the simple structure of bubble columns, the behaviour of the bubbly flow is still not well understood owing to the complexity of gas–liquid interactions and coupling between the phases. Variation of gas density and initial liquid height are the most likely reasons for gas holdup changes in bubble columns. These parameters affect bubble breakup and coalescence as well as the rise velocity of small bubbles, which causes change to bubble size distribution that finally affect the gas holdup. In this work, through the application of computational fluid dynamics (CFD) and by investigating the effect of gas density and the initial liquid height on the bubbly flow condition, a new correlation for deducing the total gas holdup is developed. To achieve this, a wide range of bubbly flows are modelled, and gas holdup values are determined for different heights and operating pressures. Ranges of the normalized pressure (P/P0), superficial Reynolds number (Resup), and the aspect ratio of the bubble column (H0/D) were 1 ≤ P/P0 ≤ 15, 3000 ≤ Resup ≤ 57000, and1.5 ≤ H0/D ≤ 8, respectively. The proposed correlation has been found to predict the experimental as well as CFD gas holdup data fairly well. The results of this research provide a fast and accurate method for predicting gas holdup in bubble columns that work either in atmospheric or high-pressure conditions.

DOI

10.1002/cjce.23355

ISSN

00084034

E-ISSN

1939019X

Link to Full Text

Share

COinS